Архитектурные системы остекления
Расчет стоимости фурнитуры
Нажимая на кнопку, вы даете согласие на обработку персональных данных и соглашаетесь c политикой конфиденциальности
КАТАЛОГ ФУРНИТУРЫ АРП
Glass fitting
Glass is the main element of spider glazing.
Swivel fitting is used for the installation of facades, entrance groups, canopies, awnings, roofs, fences.
Fixed bolt is used for the device of partitions and fences.
Swivel fitting is used for the installation of facades, entrance groups, canopies, awnings, roofs, fences.
Fixed bolt is used for the device of partitions and fences.
Swivel fitting for glass and glass unit
Swivel fitting for glass thickness from 6 to 25,52 mm
Specifications:
Mounting classical
Specifications:
- steel: AISI 316
- axis diameter M14
- length of the axis 65 mm
- head diameter 60 mm
- glass drilling with a diameter of 36 mm
- glass thickness from 6 to 25,52 mm
Mounting classical
Swivel fitting for glass thickness from 6 to 25,52 mm
Specifications:
Mounting classical
Specifications:
- steel: AISI 316
- axis diameter M14
- length of the axis 65 mm
- head diameter 42 mm
- glass drilling with a diameter of 42/36 mm
- glass thickness from 6 to 25,52 mm
Mounting classical
Swivel fitting for triplex thickness from 15,52 to 40 mm
Specifications:
Mounting classical
Specifications:
- aluminum head is laminated between layers of triplex
- the rear glass of the triplex is at least 10 mm
- steel: AISI 316
- axis diameter M14
- length of the axis 65 mm
- head diameter 44 mm
- glass drilling with a diameter of 44/38 mm
Mounting classical
Swivel fitting for insulated glass unit
of 33.52 mm to 49.52 mm
non-fluch countersunk head
Specifications:
The thermal break provides additional protection from cold!
Mounting classical
of 33.52 mm to 49.52 mm
non-fluch countersunk head
Specifications:
- steel: AISI 316
- axis diameter M14
- length of the axis 65 mm
- head diameter 60 mm
- glass drilling with a diameter of 36/42/46 mm (see the drawing)
- Remote rings:
- 11.5 mm, 15.5 mm, 17.5 mm, 18.5 mm, 21.5 mm.
The thermal break provides additional protection from cold!
Mounting classical
Swivel fitting for insulated glass unit. Fixed on the rear triplex of the insulating glass unit
non-fluch countersunk head
Specifications:
Double-sided self-adhesive tape provides reliable fixation with glass, thereby simplifying the process of assembling insulating glass in the production.
Mounting classical
non-fluch countersunk head
Specifications:
- for the rear triplex 13,52 mm and 17,52 mm
- steel: AISI 316
- front cover in anodised aluminum
- axis diameter M14
- length of the axis 65 mm
- head diameter 60 mm
- glass drilling with a diameter of 38/44 mm
Double-sided self-adhesive tape provides reliable fixation with glass, thereby simplifying the process of assembling insulating glass in the production.
Mounting classical
You can buy rutiles for glass, triplex and insulated glass unit.
If insulation of premises is required, then insulated glass unit are used,
in other cases - triplex and tempered glass.
For insulated glass unit we offer swivel fitting with thermal break, for insulated glass unit ARP-T700 и swivel fitting with thermal break, for insulated glass unit ARP-700AL.
For glass and triplex under the cylindrical hole in the glass swivel fitting ARP-S900. Under the countersink hole in the glass rutile rutile series swivel fitting ARP-Z800.
If insulation of premises is required, then insulated glass unit are used,
in other cases - triplex and tempered glass.
For insulated glass unit we offer swivel fitting with thermal break, for insulated glass unit ARP-T700 и swivel fitting with thermal break, for insulated glass unit ARP-700AL.
For glass and triplex under the cylindrical hole in the glass swivel fitting ARP-S900. Under the countersink hole in the glass rutile rutile series swivel fitting ARP-Z800.